The new meaning of "File" Server! PAGE3

Next I had to figure out how I would make everything work..... Soooo... I went and took apart on OLD computer case... like 486 computer case. I took out 2 3 1/2 holders. This will give enough expansion slots for future hard drives and the floppy disk. I also took the 5 1/4 drive holder to mount the cd-rom. Below is the picture after I drilled the fan holes and mounted the 3 1/2 holders.

If you look closely, you can see where I drilled and installed the brass screw holders for the mother board.

If you look above, I had to use the dremel to cut out the back of the drawer. This helped because the drawer would not close with the fans attached to the back of the cabinet. Here is a shot from the front with the fans/grills attached...

Next Page -->